Barco S3 User Manual page 207

Software subtab
Controller tab: Software subtab
User Pref subtab
Controller tab: User Pref subtab
R5905948 EVENT MASTER DEVICES 17/07/2017
This panel displays the serial number and the software version
for each detected controller.
When the Controller > Software subtab is selected in the
Resources area, the Web App area shows the EC-200 web app.
The user can upgrade the EC-200 software through the EC-200
web app.
This panel displays the user-defined preferences for each
detected controller. The user can also adjust the preferences
in this panel.
• Touch Screen Contrast: Change the contrast of the touch
screen displays. Range is 0–100.
• Touch Screen Backlight: Change backlight brightness of
the touch screen displays. Range is 0–100.
• LED Brightness: Change the brightness of the LEDs
under the buttons. Range is 0–6000.
• Script Light Brightness: Change the brightness of the
LED script lights. Range is 0–16000.
Work Light Brightness: Change the brightness of the
•
white LEDs on the front bottom of the controller. Range
is 0–16000.
• Rear Light Brightness: Change the brightness of the red
LEDs on the rear top of the controller. Range is 0–16000.
• LCD Brightness: Change the LCD display brightness.
Range is 0–7.
6. EM GUI orientation
203