Programming Menu > Adjustment Area > Global Transition Rate/Trans/Cut - Barco S3 User Manual

6.29 Programming Menu > Adjustment area > Global Transition Rate/Trans/Cut
General
At the bottom of the adjustment panel, is the transition rate and type buttons. These actions are executed for the selected Destina-
tions.
Description
These controls are disabled if no Destination is selected.
Image 6-74
All Trans button
This button transitions the Preview into Program according to the transition rate. The transition Rate is transition rate in frames of
the native rate.
Four transition types are available: Linear, S-Curve, Logarithmic and Exponential.
Image 6-75
CUT button
Pressing the CUT button immediately presents the Preview to the Program.
R5905948 EVENT MASTER DEVICES 17/07/2017
6. EM GUI orientation
191