Barco S3 User Manual page 151

Image 6-36
Cabling between two S3–4K Jr. units
To link an E2 Jr. unit to an S3–4K Jr. unit, connect Link cables between the Link connectors as follows:
• VP ID 0, Link Card slot 1, Link 1 >> VP ID 1, Link Card slot 1, Link 2
• VP ID 0, Link Card slot 1, Link 2 >> VP ID 1, Link Card slot 1, Link 1
See image 6-37 for an example of the cabling between an E2 Jr. unit and an S3–4K unit.
Image 6-37
Cabling between an E2 Jr. unit and an S3–4K Jr. unit
Event Master Configuration
1. Start the Event Master Toolset version 4.1 or higher.
2. Make sure that both units are discovered on the network and that they have different Unit IDs.
3. Drop the first in the GUI.
4. Drop the second unit in the GUI.
You will be presented the option to add as a new system, add as a master, or add as a slave. An S3–4K can be added as a
Master or Slave to an E2.
R5905948 EVENT MASTER DEVICES 17/07/2017
6. EM GUI orientation
147