Programming Menu - Barco S3 User Manual

6.18 Programming Menu

General
The programming page is where the event is set up and everything comes together. Users can define sources from inputs, assign
layers and backgrounds into screens and create User keys and presets and more. Once programmed and defined this is where the
show is played back as well.
Description
Image 6-38
Programming Menu Overview
1 Resources area
2 Workspace / Programming Diagram area
3 Workspace / System wide function
4 Adjustment area
The following sections describe each part of the Programming page in detail:
• "Programming Menu > Resources area", page 150
• "Programming Menu > Diagram area", page 163
• "Programming Menu > Layer Modifier area", page 166
• "Programming Menu > Adjustment area", page 170
R5905948 EVENT MASTER DEVICES 17/07/2017
This area contains the available resources for
programming and playback, as inputs and sources. Also
in this area the still store (logo) images are shown.
For each destination or destination group the Program and
Preview screens can be viewed individually by selecting
the corresponding tab. All Program and Previews screens
can be viewed simultaneously by selecting the "View All"
button.
The space between Program and Preview has Layouts, a
function where a certain group of destinations can be laid
out in the workspace
Layer Alignment adjustments and controls to manage the
Preview/Program screens.
The menus in this area provide control of parameters
for selected layer and source. These can be modified
and managed. This is where creation of User Keys and
presets is done
6. EM GUI orientation
149