System Setup Sequence - Barco S3 User Manual

7.2

System setup sequence

Set up from A to Z
This section provides a top level view of the entire Event Master series processor setup procedure, plus links to each individual
sequence.
For the optimum Event Master series processor setup, it is recommended that you follow all procedures in
the order outlined below.
Set up from A to Z
1. Power up and Status check. For more information see section "Power up and Status check", page 222.
2. Return to factory default. For more information see section"Return to factory default", page 223.
3. Communication setup allows setup to the Ethernet settings. For more information see section"Communication setup", page
224.
4. Restoring the system procedure restores the system to a previously saved configuration from a USB drive. For more information
see section "Restoring the system", page 225.
5. User preference setup is used to set a variety of important user preferences. For more information see section "User preference
setup", page 226.
6. Saving the setup procedure saves all system setup parameters. For more information see section"Saving the setup", page 227.
7. Backing up the system procedure backs up your system configuration to a USB drive. For more information see section"Backing
up the system", page 228.
8. Configuring Menu > Initial Setup. For more information see section "Configuration Menu > Initial Setup ", page 229.
9. Configuring Menu > Add Background(s). For more information see section "Configuration Menu > Add Background(s)", page
230.
10.Configuring Menu > Add Inputs. For more information see section "Configuration Menu > Add Inputs", page 231.
11. Configuring Menu > Add Outputs. For more information see section "Configuration Menu > Add Outputs", page 233.
12.Configuring Menu > Add Screen Destinations & Layers. For more information see section "Configuration Menu > Add Screen
Destinations & Layers", page 236.
13.Configuration Menu > Layer optimization. For more information see section "Configuration Menu > Layer optimization", page
239.
14.Configuring Menu > Add Aux Destinations. For more information see section "Configuration Menu > Add Aux Destinations",
page 240.
15.Configuring Menu > Add MVR Outputs. For more information see section "Configuration Menu > Add MVR Outputs", page
242.
16.Programming Menu > Capture Stillstore from Inputs & Backgrounds. For more information see section "Programming Menu
> Capture Stillstore from Inputs & Backgrounds", page 244.
17.Programming Menu > Select Thumbnails for Backgrounds. For more information see section "Programming Menu > Select
Thumbnails for Backgrounds", page 245.
18.Programming Menu > Select Thumbnails for Inputs. For more information see section "Programming Menu > Select Thumb-
nails for Inputs", page 246.
19.Programming Menu > Create Sources from Inputs. For more information see section "Programming Menu > Create Sources
from Inputs", page 247.
20.Programming Menu > Drop backgrounds into Screen Destinations. For more information see section "Programming Menu
> Drop backgrounds into Screen Destinations", page 248.
21.Programming Menu > Drop Layers into Screen Destinations & Sources into layers. For more information see section
"Programming Menu > Drop Sources, Layers into Screen Destinations & Sources into layers", page 249.
22.Programming Menu > Drop Inputs to Aux Destinations. For more information see section "Programming Menu > Drop Inputs
to Aux Destinations", page 251.
23.Programming Menu > Presets And User Keys. For more information see section "Programming Menu > Presets And User
Keys", page 252.
24.Programming Menu > Destination Transition. For more information see section "Programming Menu > Destination Transition",
page 253.
25.Multiviewer Menu > Drop Inputs, Backgrounds and Destinations. For more information see section "Multiviewer Menu >
Drop Inputs, Backgrounds and Destinations ", page 254.
R5905948 EVENT MASTER DEVICES 17/07/2017
7. System Setup
221