Barco S3 User Manual page 136

6. EM GUI orientation
Output menu – Main submenu
Operate similar as the Output adjustment panel > Main page. See above.
132
Operate similarly to the Output adjustment panel > Main menu.
• Test pattern: Turns the Test Patterns ON and select the
desired type. The default setting is OFF. Test pattern types:
– Horizontal Ramp
– Vertical Ramp
– 100% Color Bars
– 16x16 Grid
– 32x32 Grid
– Burst
- –75% Color Bars
– 50% Gray
• Raster box: Turns ON or OFF on a raster around
the default active area. This raster box is a white,
single-pixel-wide broken line.
• Diagonal Motion: Turns the Diagonal Motion ON or OFF
for select patterns:
- The motion is a bottom-right to top-left diagonal for
16x16, 32x32 grid.
- The motion is right to left for 100% Color Bars.
- There is no motion in Horizontal and vertical Ramps and
other patterns.
• Area of Interest (AOI): A raster box that can be positioned
and sized within the outputs active area, it effectively makes
the AOI the new active area.
This raster box is a green, single-pixel-wide broken line that
helps you adjust the AOI within the output's active area The
handles for the AOI menu are:
- H Size and V size: Adjusts the horizontal and vertical
positions respectively.
- H Pos and V pos: Adjusts the horizontal and vertical
positions respectively.
- Note a lock button allows user to lock the aspect ratio
of the size.
• Reset button: resets the AOI to default which is the full
output area.
R5905948 EVENT MASTER DEVICES 17/07/2017
– Horizontal steps
– Vertical steps
– White
– Black
– SMPTE Bars
– H Alignment
– V Alignment
– H V Alignment
– Circle Alignment