Syntax Entry Button Group (Ec-200 Only) - Barco S3 User Manual

10. Controller orientation

10.18 Syntax Entry Button Group (EC-200 only)

Overview
This group of buttons is present only on the large controller.
Image 10-21
1 Syntax entry Button Group
R Right Side of the Controller
Description
Image 10-22
These buttons are used in the programming syntax introduced with EC-200. A programming syntax will be necessary in order to
effectively program the Event Master System once its full size becomes available.
When each group of resources can be several hundred, direct select buttons seize to be effective. The syntax allow direct access
with a few keystrokes.
Each button is further explained in the chapter "Controller Operation", page 323,
304 R5905948 EVENT MASTER DEVICES 17/07/2017