Table of Contents
Advertisement
6.12 Configuration Menu > Adjustment > Unit Configuration
General
In the unit configuration adjustments panel, the user can define and adjust unit (device) specific parameters.
How to access the unit configuration adjustments panel
1. Select the device (unit) that you want to configure. Refer to "Configuration Menu > System diagram area", page 100 and see the
subsection "How to select device."
The device is selected. The device is highlighted in blue in the System diagram area and the name of device is indicated in the
Adjustment tab in the Adjustment area.
2. Click on the Adjustment tab in the Adjustment area.
The adjustment panel dedicated to the unit is displayed.
Description
R5905948 EVENT MASTER DEVICES 17/07/2017
Settings tab:
•
Name: The name of the unit can be edited here.
•
Contact info: User information for contact person
responsible for the unit.
•
SW Version: Unit's Firmware version.
•
OS Version: Unit's OS version.
Note: The EM GUI has its Software version shown in the
Settings Page.
•
Resets: (If the user selects one of the reset options, a
confirmation pop up appears.)
-
Soft: Resets the unit without erasing any stored settings,
similar to a Power Off / On.
-
Factory (Save IP & EDID & ID): Full factory reset with
the exception of keeping the Ethernet setup (IP), the
Input EDID settings, and the Unit ID settings.
-
Shut down: Powers down the unit.
-
Factory (Full): Full factory reset erases all stored
settings.
-
Factory (Save IP): Full factory reset with the exception
of keeping the Ethernet setup.
-
Factory (Save IP & EDID): Factory reset, but keep IP
and Input EDID settings.
•
Ethernet communication setup area.
IP Mode:
Each EMP model has a standard static IP Address.
•
E2 (and E2 Jr.) = 192.168.0.175
•
S3–4K (and S3–4K Jr.) = 192.168.0.176
•
EX = 192.168.0.185
If a DHCP IP address is required, the unit can be set to
accommodate that too.
The unit can also have a specific IP Address assigned by the
user to match a specific network environment.
6. EM GUI orientation
105
Advertisement
Table of Contents
Troubleshooting
