13. E2 Maintenance
13.26 VFD Cable
The flat ribbon VFD cable connects the VFD assembly to the System Power board. This procedure provides
instructions on how to disconnect the cable on both sides.
Concerned parts
R767269K
Cable Kit Set
Necessary tools
•
1 x Phillips Screwdriver #2
•
Hex Screwdriver
How to remove the VFD Cable
1. Partially remove the front panel assembly and pull it away to expose the cables behind it (refer to the related procedure).
2. Push out the side latches on VFD connector to release the VFD cable.
Image 13-67
3. Gently push the cable through the grommet located in the 1RU tray.
394
Image 13-66
R5905948 EVENT MASTER DEVICES 17/07/2017