Emi Filter - Barco S3 User Manual

13.8 EMI Filter

Concerned parts
R767272K EMI Filter
Necessary tools
None.
How to remove the EMI Filter
1. Remove the EMI filter by first pulling gently the right side out and then untucking the left side from behind the key features.
Image 13-16
How to install the EMI Filter
To install the EMI Filter follow the same procedure in the reverse order.
Begin by tucking in the left side behind the key features. To get the right hand side in position, use fingers in
the center to pull the filter forward, while pushing the right hand side behind the key feature in the rack ears.
Then push the entire filter into position.
The filter will push against the four flat sections on the front of the fan trays.
Image 13-17
R5905948 EVENT MASTER DEVICES 17/07/2017
Image 13-15
13. E2 Maintenance
361