Settings Menu - Barco S3 User Manual

6.38 Settings Menu

General
The Settings menu provides access to the Event Master series processor web app that is built into the unit. The app provides users
with diagnostic reports, includes an FAQ section and contact information and supports system backup / restore and new firmware
installation.
Description
This menu is accessible by clicking the System Settings icon on the menu bar on the left side of the UI. If there are no System
/ VPs connected in the system, this button is disabled.
Image 6-86
Settings Menu
1 Resources area
2 Status
3 Refresh Web app area button
4 System select combo box
R5905948 EVENT MASTER DEVICES 17/07/2017
The Resources area contains the Options, Controller, and
Devices tabs.
• The Controller tab shows EC-50 / EC-200 settings
and is applicable only when an EC-50 / EC-200
controller is connected on the network.
• The Devices tabs shows what Barco devices (such
as projectors) are detected on the network.
• The Option tab allows the user to choose settings
concerning the Event Master Toolset Software.
Please see the sections below dedicated to these options.
Show status:
• Online: the VP is online and the web application can
be reached.
• Web application error: the VP is online but the web
application cannot be displayed.
• Offline (in red text): the VP is offline.
Similar to web browser, pressing this button will trigger
an attempt to refresh / reconnect to the web interface of
the selected VP.
Informs the users which System is currently being
selected. If there is more than 1 System defined in the
UI, this combo box can be used to select between the
different Systems.
6. EM GUI orientation
201