Barco S3 User Manual page 182

6. EM GUI orientation
Layer adjustment panel > Layer Effects adjustment
178
• RGB Contrast and Brightness settings are adjustable within
a range of 0% to 200%. The default setting for all of these
properties is 100%.
• Gamma is adjustable within a range of 0.3 to 3.28. The
default setting is 1.0.
• Hue is adjustable within a range of -180 to +180 degrees.
The default setting is 0 degrees.
• Gamma is adjustable within a range of 0.3 to 3.28. The
default setting is 1.0.
• Saturation is adjustable within a range of 0% to 200%. The
default setting is 0%.
• Monochrome: Toggle this button to turn the source video's
chroma component on and off. When off, the image is
completely monochrome;
• Invert: Toggle this button to turn the color "invert" function
on and off. When on, all image colors are inverted.
• Reset All: Returns all values to their default settings.
• Strobe: Toggles the strobe function on and off. When
On, adjust the strobe Rate interval (in frames) to set the
duration that the source is frozen until the next grab.
• Flip: Flips the image within the PIP:
- Off: The image is displayed in its original orientation.
- H: to flip the image horizontally, along the Y axis.
- V: Flips the image vertically, along the X axis.
- H/V: Flip the image both horizontally and vertically,
along the X and Y axes.
• Freeze: Enables or disables the freeze action.
Note that almost all color correction effects (except "invert")
work on a keyframe by keyframe basis. This enables you to
morph effects from keyframe to Keyframe.
R5905948 EVENT MASTER DEVICES 17/07/2017