What Are Layer Executers - Barco S3 User Manual

12. Controller Operation

12.7 What are Layer executers?

General
These are the buttons to the right of the Layer Buttons, the function of them is described in context above and in detail below.
Freeze PGM
Button Freezes program of selected Layer(s) of the selected destination(s), blue LED when active.
Press again to release freeze.
Freeze PVW
Button freezes preview of selected Layer(s) of the selected destination, blue LED when active.
Press again to release freeze.
Arm
Button arms effects on selected layers in all selected destinations.
Indication of armed FX on PGM, red LED.
Indication of armed FX on PVW, green LED.
Match
Match the selected layer in Preview to its corresponding layer in Program.
Button matches the function of Match Program in the GUI.
Blinks red when pressed.
Can be used across multiple layers and destinations.
Layer Trans
Transitions Selected Layers into Program, based on # of frames set for the layer in the GUI.
Button matches the function of Trans in the GUI below the workspace.
Layer Cut
Cut selected layer into Program.
Button matches the function of CUT in the GUI below the workspace.
330 R5905948 EVENT MASTER DEVICES 17/07/2017