Rear I/O And Link Cards - Barco S3 User Manual

13. E2 Maintenance

13.4 Rear I/O and Link Cards

Overview
Image 13-4
1 Chassis
2 I/O and Link Cards
Concerned parts
R9004740 DVI Input
R9004741 SDI Output
R9004742
SDI Input
R9004743 HDMI Output
R9004744 DP/HDMI Input
R9004745 DVI Output (*)
R9004746
Link Card
(*) Not available in release 1)
Necessary tools
Phillips Screwdriver #2.
How to remove a card
1. Locate the card you wish to replace.
Note: There are 14 card slots. The first slot on the left is slot 1 and the last slot on the most right position is 14.
2. Loosen and unscrew the top and bottom thumbscrews that are holding the card to the chassis.
3. Gently pull the card out of its slot.
Tip: You may need to wobble it a little bit up or down to loosen it from the card guides as you are pulling out.
354
Image 13-3
R5905948 EVENT MASTER DEVICES 17/07/2017