Barco S3 User Manual page 127

Output adjustment panel > Main page
R5905948 EVENT MASTER DEVICES 17/07/2017
• Auto Configure Output format: Selects the output format
will be set to match the format contained in the EDID of the
display device connected to the corresponding output(s).
• Name: The name of the output configuration can be edited
in this field.
• Format: Selects the video format of the output configuration
from the drop-down menu. The available formats are in
compliance with the output configuration type. For example,
if the configuration is 4K, only 4K formats will be presented
in the drop-down menu.
• Test pattern: Turns the Test Patterns ON and select the
desired type. The default setting is OFF. Test pattern types :
- Horizontal Ramp
- Vertical Ramp
- 100% Color Bars
- 16x16 Grid
- 32x32 Grid
- Burst
- 75% Colorbars
- 50% Gray
-
• Raster box: Turns ON or OFF on a raster around the default
active area. This raster box is a white, single-pixel-wide
broken line.
• Diagonal Motion: Turns the Diagonal Motion ON or OFF
for select patterns
- The motion is a bottom-right to top-left diagonal for
16x16, 32x32 grid
- The motion is right to left for 100% Color Bars.
- There is no motion in Horizontal and vertical Ramps and
other patterns
• Area of Interest (AOI): A raster box that can be positioned
and sized within the outputs active area, it effectively makes
the AOI the new active area.
This raster box is a green, single-pixel-wide broken line that
helps you adjust the AOI within the output's active area
The handles for the AOI menu are:
- H Size and V size : Adjusts the horizontal and vertical
positions respectively
- H Pos and V pos: Adjusts the horizontal and vertical
positions respectively
- Note a lock button to allow user to lock the aspect ratio
of the size.
• Reset button: resets the AOI to default which is the full
output area.
Note: The AOI of AUX outputs works as above while Program
outputs will be implemented during 2015.
6. EM GUI orientation
- Horizontal steps
- Vertical steps
- White
- Black
- SMPTE Bars
- H Alignment
- V Alignment
- H V Alignment
- Circle Alignment
123