To Conference Two Calls - NEC UNIVERGE DT700 User Manual

To conference two calls

1
Figure 7.32 Conf key on DT710 (ITL-2E) phone
Figure 7.33 Conf softkey on DT710 (ITL-6DE) phone
Figure 7.34 Conference softkey on DT730 (ITL-8LD, ITL-12D, ITL-24D,
2
3
4
Figure 7.35 Conference Calls
7-112
B A S I C P H O N E O P E R A T I O N
Call Transferring and Conferencing
Conference Reminder Tone
A Conference Reminder tone may be enabled on your phone. If enabled, a reminder
tone is played periodically when you have established a 3-party conference call from
your telephone. You may also hear the phone if you a called party on another 3-party
conference that was established from another phone enabled for the conference
reminder tone.
While on a call, press the Conf key, or press the Conf or Conference softkey.
and ITL-32D) phones
Use the key pad to dial the telephone number of the party to be joined in the conference.
Press the Dial softkey to initiate the call, or wait a few seconds for the call to be
automatically dialed.
If you decide not to complete the conference, the new call can be terminated by
a.
pressing the EndCall softkey.
Press the Conf key, or press the Conference softkey after the other party has answered
their phone to complete the conference.
DT700 Phone User Guide