NEC UNIVERGE DT700 User Manual page 164

3
Figure 8.58 Personal Directory Name Screen
4
Figure 8.59 Enter Telephone Number
5
6
8-146
P R O G R A M M A B L E K E Y S
Speed Dial and Programmable Keys
Use the telephone keypad to enter the name and press Enter
OK softkey.
Up to 24 characters may be entered for the name.
• Press the Delete softkey to delete the last character entered, or press the
Cancel softkey to return to the previous screen.
• To switch between first letter uppercase, all uppercase, all lowercase and
numbers for keypad entry, press the
• To add a space to an entry, press
• To enter special characters, press the
For a list of special characters, see "Speed Dial and Personal Directory
Character Sets" in the DT700 Phone User Guide.
• To move the cursor position in the LCD screen, use the right and left cursor pad
keys.
Use the telephone keypad to enter a phone number for the entry and press Enter
the cursor pad or the OK softkey.
Up to 24 characters may be entered for the number. Only digits, "*" and "#" may be
entered.
• To move the cursor position in the LCD screen, use the right and left cursor pad
keys.
• You can also press the Delete softkey to delete the last character entered, or
press the Cancel softkey to return to the previous screen.
Use the telephone keypad to enter a Speed Dial number for the entry and press Enter
on the cursor pad or the OK softkey.
Speed Dial entries can be internal or external numbers.
b
on the cursor pad or the
*
key on the keypad.
#
.
1
key.
b
on
b
DT700 Phone User Guide