Three/Four-Party Conference; Voice Mail; Preset Answer; To Set Preset Answer - NEC UNIVERGE DT930 User Manual

This feature is set by Soft key or
feature key. The feature key is set by
system data setting at initial
installation. For details, please contact
the system administrator.
1.
Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red.
Line key lamp lights green.
2.
Dial extension number.
You will receive a ring back tone.
3.
Press Soft key (VOICE) or Voice Call feature key.
4.
Lift the handset and announce an incoming call
by voice to called party.
Speaker key lamp goes off.
5.
5. Start conversation after called party answered.
"VOICE" is displayed on the LCD of
called party.
THREE/FOUR-PARTY
CONFERENCE
This feature provides a terminal user the ability to
add-on another party to a call already in progress.
This feature is set by Soft key or
feature key. The feature key is set by
system data setting at initial
installation. For details, please contact
the system administrator.
1.
While extension A (200) and extension B (201) are
engaged in a Two-party connection.
Example: Add the ext. C to conversation.
2.
Extension A presses Transfer key.
Ext. A will receive a special dial tone.
Ext. B will receive a Music on Hold.
3.
Extension A dials the number of Extension C
(210).
4.
Extension C answers the transfer call.
5.
Extension A presses Soft key (CONF) or
Three/Four-Party Conference feature key.

VOICE MAIL

This section explains how to access to the Voice
Mail System.
1.
Press Voice mail access key.
Voice Mail System answers.
Example: Number "5205" is Voice Mail
System.
For details of Voice Mail operations,
please refer to the User Guides of
Voice Mail System

PRESET ANSWER

It is possible to respond by simply lifting up the
handset of the terminal as usual telephone.

TO SET PRESET ANSWER

1.
While Answer key lamp goes off.
2.
Press Feature key.
Feature key lamp lights red.
3.
Press Answer key.
Feature key lamp goes off.
Answer key lamp lights red.
ANSWER TO A CALL WITH PRESET
ANSWER
1.
Ringing and the Call Indicator Lamp flashing.
2.
Lift the handset.
Call Indicator Lamp goes off.

TO CANCEL

1.
While Answer key lamp lights red,
2.
Press Feature key.
Feature key lamp lights red.
64
FEATURE OPERATION