NEC UNIVERGE DT700 User Manual page 304

Figure 11.73 Edit Speed Dial
Figure 11.74 Edit Monitor
11-286
C A L L H I S T O R Y, A N D T H E C O R P O R A T E A N D P E R S O N A L D I R E C T O R I E S
The Personal Directory
3
Speed Dial
For more information on Speed Dial Keys, see "Speed Dial and Programmable
Note:
Keys" on page 8-124.
To delete the speed dial, press the Delete softkey.
a.
Or
To edit the speed dial, use the left cursor key on the cursor pad to backspace, and
then press the Delete softkey to delete the number that is before the cursor. Use the
telephone keypad to edit the number.
The number of available Sped Dial Keys and their associated numbers depend on
your model of DT700 phone. For more information on the valid Speed Dial Keys for
the specific phone models, see "Speed Dial Key Numbering" on page 8-128.
• You can also press the Delete softkey to delete the last character entered, or
press the Cancel softkey to return to the previous screen.
b
Press Enter on the cursor pad or the OK softkey.
b.
4
Monitor
Monitoring can only be done on other lines that are internal to your system.
Note:
You cannot monitor external or outside lines.
If you have a Speed Dial number assigned for this entry or are adding a Speed Dial
a.
number for the entry, you can select the monitor status you want for the entry.
Valid options for monitoring are:
1
• None - Do not monitor presence state changes for this Speed Dial Key
2
• Visual - Presence state is shown visually using the LED on the Speed Dial Key
when a Speed Dial is assigned to the entry, and a Presence icon is shown in the
Personal Directory and on the DESI-Less display of the ITL-8LD phone.
3
• Visual and Soft Ring - Presence state is shown visually using the LED on the
Speed Dial Key when a Speed Dial is assigned to the entry, and a Presence icon is
shown in the Personal Directory and on the DESI-Less display of the ITL08LD
phone. When a call is ringing on the monitored terminal, play a soft ring tone.
DT700 Phone User Guide