Installation; Before You Begin; Adjusting Angle Of Tilt Leg; To Raise Tilt Leg - NEC UNIVERGE DT700 User Manual

Ch 3 - Installation
I
NSTALLATION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 3.1

To raise tilt leg

1
2
DT700 Phone User Guide
B E F O R E Y O U B E G I N
• Remove the phone from its packaging and inspect the phone for any damages.
• Verify that a station/account has been created for the user and DT700 phone.
• These steps only outline the setup of the equipment and physical connection of the
phone to the network. For information on configuring a DT700 phone for
connection to the network, contact your system administrator.
• Read through the installation procedures and assemble any equipment required to
install the phone (10 BASE-T/100 BASE-T/TX LAN cable, power adapter, tapered
rod, screwdrivers, etc.).
A D J U S T I N G A N G L E O F T I L T L E G
The angle of the tilt leg can be adjusted in four levels.
Tilt Levels
Fourth Level
Third Level
Second Level
First Level
Turn the phone upside down.
Adjust the tilt leg in the direction of the arrow until you hear it click.
3
3-43