To Switch Between Two Calls - NEC UNIVERGE DT700 User Manual

Figure 7.38 Split softkey

To switch between two calls

1
Figure 7.39 Conf key on DT710 (ITL-2E) phone
Figure 7.40 Conf softkey on DT710 (ITL-6DE) phone
Figure 7.41 Conference softkey on DT730 (ITL-8LD, ITL-12D, ITL-24D,
2
3
7-114
B A S I C P H O N E O P E R A T I O N
Call Transferring and Conferencing
Each party is now treated as a separate phone call.
After you have split a conference, you cannot rejoin the calls in a conference
Note:
without having one party hang up so you can start a new 3-way conference
call.
C O N F E R E N C E S H U T T L E
The Conference Shuttle feature allows you to switch between two separate phone
calls, putting one on hold while you are on the other call, before you join the calls in a
conference.
You cannot shuttle between calls after you have joined two calls in a
Note:
conference call.
While on a call, press the Conf key, or press the Conf or Conference softkey.
and ITL-32D) phones
Use the key pad to dial the telephone number of the party to be joined in the conference.
Press the Dial softkey to initiate the call, or wait a few seconds for the call to be
automatically dialed.
DT700 Phone User Guide