NEC UNIVERGE DT700 User Manual page 179

Figure 8.93 Edit Telephone Number
Figure 8.94 Edit Speed Dial Number
DT700 Phone User Guide
• To enter special characters, press the
For a list of special characters, see "Speed Dial and Personal Directory
Character Sets" in the DT700 Phone User Guide.
• To move the cursor position in the LCD screen, use the right and left cursor pad
keys.
b
Press Enter on the cursor pad or the OK softkey.
b.
2
Number
To delete the entire number entry, press the Delete softkey.
a.
Or
To edit the entry, use the left cursor key on the cursor pad to backspace, and then
press the Delete softkey to delete the number that is before the cursor. Use the
telephone keypad to edit the number.
Up to 24 characters may be entered for the number. Only digits, "*" and "#" may be
entered.
• To move the cursor position in the LCD screen, use the right and left cursor pad
keys.
• You can also press the Delete softkey to delete the last character entered, or
press the Cancel softkey to return to the previous screen.
b
Press Enter on the cursor pad or the OK softkey.
b.
3
Speed Dial
To delete the speed dial, press the Delete softkey.
a.
Or
To edit the speed dial, use the left cursor key on the cursor pad to backspace, and
then press the Delete softkey to delete the number that is before the cursor. Use the
telephone keypad to edit the number.
The number of available Sped Dial Keys and their associated numbers depend on
your model of DT700 phone. For more information on the valid Speed Dial Keys for
the specific phone models, see "Speed Dial Key Numbering" on page 8-128.
P R O G R A M M A B L E K E Y S
Speed Dial and Programmable Keys
1
key.
8-161