Hot Desk Key; To Log Out Of Your Hot Desk Session; Trunk Dial Key - NEC UNIVERGE DT700 User Manual

To log in to a Hot Desk session
1
2
Figure 9.43 Hot Desking login successful
3

To log out of your Hot Desk session

1
Figure 9.44 Hot Desking logout successful
2
9-208
D T 7 0 0 M I C R O B R O W S E R A N D E N H A N C E D P R O G R A M M A B L E K E Y S
Using Enhanced Programmable Keys
H O T D E S K K E Y
Press the Hot Desk key to open the Hot Desk login screen.
Enter your user name and password and press the OK soft key to log on to the phone.
The following screen is shown:
Press the OK to exit the screen.
The LED on the Hot Desk key turns off when you exit this screen.
Due to system polling, it may take up to 5 minutes before your name and
Note:
extension are shown on the phone after you log in.
While you are in a Hot Desk session, press the Hot Desk Key.
You are logged out off the phone, and the following screen is shown:
Press OK to exit the screen.
The LED on the Hot Desk key turns off when you exit this screen.
T R U N K D I A L K E Y
The Trunk Dial key is used to monitor the availability of trunks on your system, and to
place calls using specified trunks on the system.
DT700 Phone User Guide