NEC UNIVERGE DT700 User Manual page 165

Figure 8.60 Select Speed Dial Number
7
Figure 8.61 Monitor Settings
Table 8.5
DT700 Phone User Guide
The number of available Sped Dial Keys and their associated numbers depend on
your model of DT700 phone. For more information on the valid Speed Dial Keys for
the specific phone models, see "Speed Dial Key Numbering" on page 8-128.
• You can also press the Delete softkey to delete the last character entered, or
press the Cancel softkey to return to the previous screen.
Select the monitor settings for this entry and press Enter
OK softkey.
Monitoring can only be done on other lines that are internal to your system.
Note:
You cannot monitor external or outside lines.
Valid options for monitoring are:
1
• None - Do not monitor presence state changes for this Speed Dial Key
2
• Visual - Presence state is shown visually using the LED on the Speed Dial Key,
and a Presence icon is shown in the Personal Directory.
3
• Visual and Soft Ring - Presence state is shown visually using the LED on the
Speed Dial Key, and a Presence icon is shown in the Personal Directory. When a
call is ringing on the monitored terminal, play a soft ring tone.
3
Option Visual and Soft Ring is only valid for SIP@Net platforms. Contact
Note:
your system administrator to determine if Soft Ring is available on your
system.
If you have Visual Monitor Settings for an entry in the Directory that also has an
assigned Speed Dial, the presence (Available, Busy or Offline) of the line is shown in
the Directory.
Monitor Presence Icons
Type
Line Key Registered
Unregistered
Status Icon
P R O G R A M M A B L E K E Y S
Speed Dial and Programmable Keys
b
on the cursor pad or the
8-147