NEC UNIVERGE DT700 User Manual page 334

Action
Call Forwarding
Deactivation
Transfer Directly to
Voice Mail
Call detail information
sent to call detail
record
Intercom from non-
intercom phone to
intercom enabled
phone
Conferencing
Directed Park
A-316
3 C S Y S T E M F E A T U R E S
Analog
Star Code
*73 *73
FLASH Hold
+ *74 + *74
+ extension + extension
+ dial
*75 *75
+ Password (client- + Password (client-
assigned account code) assigned account code)
+# +*
*76 + extension *76 + extension
With a call connected: Feature not available with
SIP
FLASH
+ extension or number
+ FLASH
+ *95
With a call connected: With a call connected:
FLASH Hold
*94 *94
+ extension + extension
+ dial
SIP Star Code
Clears the telephone unit's call forwarding
conditions. Once this star code is invoked, you must
add any appropriate forwarding conditions back to
the extension. Any existing forwarding conditions
that were set by the phone application will still remain
in effect.
Note: A confirmation tone will sound after applying
this star code command.
Telephone sets can transfer a party directly to
another voice mailbox.
The phone system sends call detail information to
the call detail record.
Note: Codes are custom assigned by the 3C system
administrator.
Callers without intercom can enter this star code to
intercom a phone equipped with intercom.
Conferences parties
Note: The user must select a new line on which to
place the second call for the conference.
Places a call to a specific station, giving the user the
ability to return to that station to retrieve the call.
Note: The user must select a new line or park zone
on which to park the call.
Explanation
User centric
Note:
users cannot use
this star code.
Contact your
system
administrator for
information on call
forwarding setup
for user centric
users.
DT700 Phone User Guide