To Install The 8Lk-L Module; Lk-L Module Installation - NEC UNIVERGE DT700 User Manual

8
Figure 3.25 Wall Mount Install

To install the 8LK-L Module

1
2
Figure 3.26 Securing the 8LK-L with Screws
3
DT700 Phone User Guide
Tuck the excess cord into the wall mount unit.
Wall
Tabs
8 L K - L M O D U L E I N S T A L L A T I O N
TO PREVENT POSSIBLE DAMAGE TO THE PHONE
WARNING!
TERMINAL DURING INSTALLATION OR REMOVAL,
DISCONNECT THE LINE CORD/LAN CABLE AND THE AC/DC
ADAPTER FROM THE PHONE TERMINAL TO POWER OFF
THE TERMINAL DURING THE INSTALLATION PROCEDURE.
Remove the left side panel from the phone.
Attach the 8LK-L module to the phone using the provided screws.
On the back of the phone, press the tab on the port cover on the left side of the back of
the phone to release the protective cover that is over the ports. Remove the cover.
I N S T A L L A T I O N
Tab Slots
3-55