NEC UNIVERGE DT700 User Manual page 212

Figure 9.26 Conference Bridge detail
9-194
D T 7 0 0 M I C R O B R O W S E R A N D E N H A N C E D P R O G R A M M A B L E K E Y S
Using the Microbrowser
In the example above, Conference Bridge 5 currently has a conference call in
progress. Conference Bridge 4, 6 and 7 currently have no calls in progress.
The Conference Bridge detail automatically updates every 30 seconds. The time
each conference participant has been connected only updates when the page is
refreshed, that is, the time does NOT update every second.
The Conference Bridge page handles the following events:
Soft Key Features:
Refresh
Back
Exit
Join
Hard Key Features:
4-way scroll BACK key
(Redial key)
4-way scroll FORWARD key
(Directory key)
4-way scroll UP key
(Volume UP Key)
4-way scroll DOWN key
(Volume DOWN Key)
ENTER key
Off-Hook (handset)
Explanation
Refresh the conference status information.
Return to the previous screen.
Exit the microbrowser and return to the appropriate call
status screen.
Dial the conference bridge address in the title bar and
display the call status screen.
Explanation
Return to the previous screen.
Dial the conference bridge address in the title bar and
display the call status screen.
Remain on existing screen and move cursor up.
Remain on existing screen and move cursor down.
Dial the conference bridge address in the title bar and
display the call status screen.
If speaker is ON, turn speaker OFF, move audio to
handset and keep focus on current screen. If headset is
active, move audio to handset and keep focus on current
screen.
DT700 Phone User Guide