NEC UNIVERGE DT700 User Manual page 183

6
Figure 8.97 Save softkey
Figure 8.98 Directory Duplicate Not Allowed Menu Display
Figure 8.99 Speed Dial In Use Menu Display
7
DT700 Phone User Guide
there will be an entry for this information. If you receive an incoming call from this
number, it will show the name and number from the saved Speed Dial.
b
Press Enter on the cursor pad or the OK softkey.
b.
Press the Save softkey to save the entry information.
For entries that are set as read-only by your system administrator, an error is
Note:
displayed and the entry is not changed.
Entries are uniquely defined by the combination of number and name. For the
purpose of uniquely defining an entry, the name is case insensitive.
Multiple entries with the same number and different names are allowed, and multiple
entries with the same name and different numbers are allowed. Multiple entries with
the same name and same number are not allowed. An error is displayed if you create
an entry with the same name and same number as an existing entry.
If the Speed Dial number for a new Personal Directory entry is already used for
another entry, you will see an error when you try to save the Personal Directory entry.
Press the OK softkey, then select
trying to save the entry again.
A confirmation displays, telling you the speed dial has been updated. Press Enter
the cursor pad or the OK softkey.
Speed Dial and Programmable Keys
3
Speed Dial to edit the Speed Dial number before
P R O G R A M M A B L E K E Y S
b
8-165
on