NEC UNIVERGE DT700 User Manual page 115

Figure 6.2
Figure 6.3
Figure 6.4
Figure 6.5
DT700 Phone User Guide
Connecting
The Connecting screen is displayed when the DT700 is re-sending "EAPOL Start"
requests after receiving an "EAPOL Success" response from the switch
(authenticator). This case happens when the authenticator is not configured with a
valid authentication server.
Held
The Held screen is displayed when the DT700 receives an "EAPOL Failure" from the
authenticator in response to the "EAP Response Identity" message. This case
happens when the authenticating server or the supplicant have incorrect credentials.
Acquired connection
The Acquired screen is displayed intermittently when the DT700 has received an
"EAPOL Request Identity" before it attempts to send an "EAPOL Response Identity"
message with the requested credentials.
Parameter missing
The Parameter(s) Missing screen is displayed when the username, password, or both
are set to empty values in 802.1x credentials.
D T 7 0 0 S E C U R I T Y F E A T U R E S
6-97