To Install Line Key Card; Wall Mounting (Optional) - NEC UNIVERGE DT700 User Manual

To install Line Key Card

1
2
3
Figure 3.20 Line Key Card Install
3-52
I N S T A L L A T I O N
Align the holes in the Line Key Card with the buttons on the phone.
Align the holes in the Line Key Panel with the Line Key buttons on the phone, and then
push the four corners of the panel until the panel clicks into place.
If you need to replace the Button Panel, align the holes in the Button Panel with the
telephone keypad buttons on the phone, and then push the four corners of the panel
until the panel clicks into place.
Line Key
Panel
Button
Panel
W A L L M O U N T I N G ( O P T I O N A L )
A separate wall mount unit is used to mount the phone to the wall. This unit connects
to the back of the phone
BE CAREFUL NOT TO DROP THE PHONE WHILE MOUNTING IT ON
CAUTION!
THE WALL. IT CAN CAUSE INJURY.
MAKE SURE THE PHONE IS FIRMLY MOUNTED ON THE WALL TO
CAUTION!
PREVENT THE PHONE FROM FALLING OUT. IT CAN CAUSE INJURY.
Line Key Card
DT700 Phone User Guide