To Delete A Speed Dial Only Entry - NEC UNIVERGE DT700 User Manual

6
Figure 8.114 Delete Entry Complete Menu Display
Figure 8.115 Personal Directory detail

To delete a Speed Dial only entry

1
Figure 8.116 Feature Key
2
•
Figure 8.117 Programmable Key LED
8-170
P R O G R A M M A B L E K E Y S
Speed Dial and Programmable Keys
The entry will be deleted from your Personal Directory.
b
Press Enter on the cursor pad or the OK softkey to return to the Personal Directory.
For Directory entries that are set as read-only by your system administrator, an
Note:
error is displayed and the entry is not deleted.
If you go to the Personal Directory, you will still see that the entire entry has been
deleted.
For Speed Dial entries that do not have a Personal Directory entry, you can delete the
Speed Dial entry.
Enter the programmable mode for your phone. The Feature key LED lights a steady red.
For information on how to enter the programmable mode for your phone, see
Note:
"Using the Feature Key" on page 8-132.
Do one of the following:
ITL-24CG, ITL-12CG, ITL-24DG, ITL-12DG, ITL-32D, ITL-24D, ITL-12D and
ITL-6DE Phones:
Press the programmable key that you want to delete. The programmable key LED
flashes.
DT700 Phone User Guide