Send To Vm Key; Hot Desk Key - NEC UNIVERGE DT700 User Manual

Table 10.3
Send to Voice Mail
•
To log in to a Hot Desk session
1
2
3
DT700 Phone User Guide
D T 7 3 0 G C O L O R M I C R O B R O W S E R A N D E N H A N C E D P R O G R A M M A B L E K E Y S
If call recording indication is enabled, a call recording icon
control home screen.
Call recording indications
Record Key
Event
On Demand recording Steady Red
On Demand recording Off
- On Hold (local or
remote hold)
Auto Recording Steady Red
No recording Off
Call terminated/
recording terminated
Call recording Off
indication is not
enabled
When multiple calls are being recorded, the DT700 keeps track of all the calls that are
being recorded and updates the state of the call recording icon based on the call
state.
S E N D T O V M K E Y
While your phone is ringing, press the Send to VM key.
The call will be sent directly to your voice mail box and the phone will stop ringing.
H O T D E S K K E Y
Press the Hot Desk key to open the Hot Desk login screen.
Enter your user name and password and press the OK soft key to log on to the phone.
The following screen is shown:
Press the OK to exit the screen.
The LED on the Hot Desk key turns off when you exit this screen.
Due to system polling, it may take up to 5 minutes before your name and
Note:
extension are shown on the phone after you log in.
Icon (Call
Control
LED
Screen)
None
None
None
Enhanced Programmable Keys
is shown in the call
Description
Indicates that the call is being
recorded by On Demand Recording.
When the recording is stopped, the
indication is also stopped.
When the call is resumed, call
recording indication is displayed
again.
Indicates that the call is being
recorded by Auto Recording.
Indicates that no call is being
recorded.
If the call you were recording is
ended, the call recording
automatically stops.
No call recording indication is shown
on the phone, even when there is a
call recording.
10-249