Loop Keys; Meet Me Conference - NEC UNIVERGE SV9100 General Description Manual

Long Conversation Cutoff
For incoming and outgoing central office calls, each trunk can be programmed to
disconnect after a defined time. The time begins when the trunk is seized and
disconnects the call after the time expires.
When used with the Warning Tone for Long Conversation feature, the system can
provide a warning tone on outgoing trunks calls before the call is disconnected.

Loop Keys

Loop Keys are uniquely programmed function keys that simplify placing and
answering trunk calls. There are three types of Loop Keys: Incoming Only, Outgoing
Only and Both Ways.



Maintenance
The UNIVERGE SV9100 system has several utilities to assist in troubleshooting and
diagnosing problems both during and after installation.
PCPro can remotely access the UNIVERGE SV9100 for maintenance and
diagnostics. Within PCPro, the debug terminal can be accessed to monitor the
systems activity and logging. PCPro also has built-in reports that can display alarm
data. If need be, an option in PCPro allows the technician to reset or initialize the
system remotely. If the technician determines the problem is isolated to a specific
slot, PCPro can reset only the slot in question.
The SV9100 Maintenance manual contains a number of flow charts to help
technicians diagnose and resolve problems that may arise during and after the
installation of the UNIVERGE SV9100 system.
Side Tone Auto Setup
Per each analog trunk (or all analog trunks) the most suitable Codec Filter setting for
Program 81-07 and Program 81-17 can be automatically adjusted using Programs
90-68-01 and 90-68-02.

Meet Me Conference

With Meet Me Conference, an extension user can set up a Conference with their
current call and up to 31 other internal or external parties. Each party joins the
Conference by dialing a Meet Me Conference code. Meet Me Conference lets
extension users have a telephone meeting – without leaving the office.
SV9100 General Description Manual
Incoming Only loop keys – answering trunk calls
Outgoing Only loop keys – placing trunk calls
Both Ways loop keys – combine the functions of both Incoming Only and Outgoing
Only loop keys
Issue 2.0
2-53