To Edit The Dial Preference - NEC UNIVERGE DT700 User Manual

Figure 4.46 LCD Low Power Mode settings
5
6

To edit the Dial Preference

1
2
3
Figure 4.47 Edit Dial Preference
4
DT700 Phone User Guide
1 2
Select Enable or Disable.
By default, low power mode is enabled on the phone.
b
Press Enter on the cursor pad or the OK softkey to accept the setting.
You can also press the Cancel softkey to exit without making any changes.
If you do not see this menu option, it has been disabled by your system
Note:
administrator.
You can set your phone to prompt you to confirm the number when dialing Personal
Directory, Speed Dial, or Call History entries. For example, if you dial external
numbers from your Call History often, you can set your dial preferences to edit before
dialing so you can enter the outside line access code when your phone dials. If you
dial mostly internal numbers or use Personal Directory entries that have the outside
line access code already programmed into the number, you can set the dial
preference so the telephone numbers dials directly.
The Dial Preference you select is applied to both the Call History and Personal
Note:
Directory/Speed Dials.
Press the Menu key.
3
Select User Settings.
6
Select Edit Before Dialing.
Select your dialing preference.
B A S I C S E T T I N G S / C O N F I G U R A T I O N
Basic Setup with the Menus and Cursor Pad
4-77