To Configure A Programmable Key As A Speed Dial Key For A Star/Hash Code - NEC UNIVERGE DT700 User Manual

To configure a Programmable Key as a Speed Dial Key
for a star/hash code
1
Figure 8.73 Feature Key
2
•
Figure 8.74 Programmable Key LED
•
Figure 8.75 Scroll Key
Figure 8.76 Programmable Key LED
3
Figure 8.77 Speed Dial Name Screen
DT700 Phone User Guide
Enter the programmable mode for your phone. The Feature key LED lights a steady red.
For information on how to enter the programmable mode for your phone, see
Note:
"Using the Feature Key" on page 8-132.
Do one of the following:
ITL-24CD, ITL-12CG, ITL-24DG, ITL-12DG, ITL-32D, ITL-24D, ITL-12D and
ITL-6DE Phones:
Press the programmable key that you want to set as a Speed Dial Key. The
programmable key LED flashes.
ITL-8LD Phones:
Press the Scroll Key to scroll to the desired page, then press the Speed Dial Key that you
want to edit. The programmable key LED flashes, and the Speed Dial information for the
key is shown.
If the Speed Dial has already been programmed, the name and number
Note:
information displays. You will need to edit the speed dial information, or add
the new information to a different Speed Dial Key. To edit the Speed Dial Key,
see "Editing Speed Dial Keys" on page 8-159.
Use the telephone keypad to enter a name for the Speed Dial and press Enter
cursor pad or the OK softkey.
P R O G R A M M A B L E K E Y S
Speed Dial and Programmable Keys
b
on the
8-155