System Telephone Set Star Code Commands - NEC UNIVERGE DT700 User Manual

Figure A.9
Figure A.10 Voicemail softkey from Call screen
2
3
Table A.2
Action
Blind Transfer
Logoff Remotely from
Hot Desking Session
DT700 Phone User Guide
Voicemail softkey
When prompted, enter your extension, followed by the
When prompted, enter your password, followed by the
3 C S Y S T E M T E L E P H O N E S E T S T A R C O D E
C O M M A N D S
You can use several star code commands directly from a telephone set on a 3C
system. Use the following star code commands to set features and perform functions
from any telephone.
Not all star codes may be enabled for your system or your model of DT700
Note:
phone.
System Star Code Commands
Analog
Star Code
FLASH Hold
+ *96 + *96
+ extension + extension
+ dial
*61 + Ext + * + *61 + Ext + * +
Password + # Password + #
(# is optional in SIP)
SIP Star Code
Completes a blind transfer to another extension.
Note: A confirmation tone will sound after applying
this star code command.
Terminates any existing Hot Desking session from
any phone on the system, regardless of the service
status.
3 C S Y S T E M F E A T U R E S
#
key.
#
key.
Explanation
A-313