To Restart Your Phone; To View The Phone Settings - NEC UNIVERGE DT700 User Manual

To restart your phone

1
2
Figure 4.52 Main menu screen
3
Figure 4.53 Confirm Reboot
To view t he phone sett ings
1
2
4-82
B A S I C S E T T I N G S / C O N F I G U R A T I O N
Basic Setup with the Menus and Cursor Pad
Any devices connected to the phone's PC port will momentarily disconnect
Note:
from the network when the phone is rebooted.
Press the Menu key.
5
Select Reboot Phone.
b
Press the OK softkey or
You will not have a dial tone on the phone or be able to make calls until the phone
restarts and re-registers on the network.
If you cannot
Note: restart
and the network for ten seconds, then reconnect the telephone to your
network and power to perform a
V I E W I N G P H O N E S E T T I N G S
If you are having problems with your phone, you may want to view the hardware
version, firmware version, or network information for your phone.
This menu item may not be available on your phone, depending on the configuration
of your phone. Contact your system administrator for more information.
You cannot change these settings on your phone. To change any of these
Note:
settings, contact your system administrator.
Press the Menu key.
6
Select Status.
Enter key on the cursor pad to restart the phone.
the phone using the Menus, unplug the phone from power
.
restart
DT700 Phone User Guide