Archive Tar - Cisco Catalyst 3750 Metro Command Reference Manual

Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands

archive tar

Use the archive tar privileged EXEC command to create a tar file, list files in a tar file, or extract the
files from a tar file.
Syntax Description /create destination-url
flash:/file-url
OL-9645-10
archive tar {/create destination-url flash:/file-url} | {/table source-url} | {/xtract source-url
flash:/file-url [dir/file...]}
Create a new tar file on the local or network file system.
For destination-url, specify the destination URL alias for the local or
network file system and the name of the tar file to create. These options
are supported:
The tar-filename.tar is the tar file to be created.
For flash:/file-url, specify the location on the local flash file system from
which the new tar file is created.
An optional list of files or directories within the source directory can be
specified to write to the new tar file. If none are specified, all files and
directories at this level are written to the newly created tar file.
The syntax for the local flash filesystem:
•
flash:
The syntax for the FTP:
•
ftp:[[//username[:password]@location]/directory]/tar-filename.tar
The syntax for the Remote Copy Protocol (RCP) is:
•
rcp:[[//username@location]/directory]/tar-filename.tar
• The syntax for the TFTP:
tftp:[[//location]/directory]/tar-filename.tar
Catalyst 3750 Metro Switch Command Reference
archive tar
2-9