Show Mac Address-Table Interface - Cisco Catalyst 3750 Metro Command Reference Manual

show mac address-table interface

show mac address-table interface
Use the show mac address-table interface user command to display the MAC address table information
for the specified interface in the specified VLAN.
Syntax Description interface-id
vlan vlan-id
Command Modes
User EXEC
Command History Release
12.1(14)AX
Examples
This is an example of output from the show mac address-table interface interface-id command:
Switch> show mac address-table interface fastethernet1/0/2
------------------------------------------
Vlan
----
1
1
Total Mac Addresses for this criterion: 2
Related Commands Command
show mac address-table address
show mac address-table aging-time
show mac address-table count
show mac address-table dynamic
show mac address-table multicast
show mac address-table notification
show mac address-table static
show mac address-table vlan
Catalyst 3750 Metro Switch Command Reference
2-544
show mac address-table interface interface-id [vlan vlan-id]
Specify an interface type; valid interfaces include physical ports and port
channels.
(Optional) Display entries for a specific VLAN; the range is 1 to 4094.
Modification
This command was introduced.
Mac Address Table
Mac Address Type
----------- ----
0030.b635.7862 DYNAMIC Fa1/0/2
00b0.6496.2741 DYNAMIC Fa1/0/2
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
Ports
-----
Description
Displays MAC address table information for the specified
MAC address.
Displays the aging time in all VLANs or the specified
VLAN.
Displays the number of addresses present in all VLANs or
the specified VLAN.
Displays dynamic MAC address table entries only.
Displays the Layer 2 multicast entries for all VLANs or the
specified VLAN.
Displays the MAC address notification settings for all
interfaces or the specified interface.
Displays static MAC address table entries only.
Displays the MAC address table information for the
specified VLAN.
OL-9645-10