Debug Ip Sla Error Twamp Control Reflector - Cisco Catalyst 3750 Metro Command Reference Manual

Appendix B Catalyst 3750 Metro Switch Debug Commands

debug ip sla error twamp control reflector

Use the debug ip sla error twamp control reflector command in privileged EXEC mode to enable
debugging output of Cisco IOS IP Service Level Agreements (SLAs) Two-Way Active Measurement
Protocol (TWAMP) showing exceptions during communication between the TWAMP server and
reflector. Use the no form of this command to disable debugging output.
Syntax Description This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History Release
12.2(52)SE
Usage Guidelines The debug ip sla error twamp control reflector privileged EXEC command displays messages about
exceptions that occurred during communications sent from the TWAMP session reflector to the TWAMP
session server.
Use the debug ip sla error twamp control reflector command before using the debug ip sla trace
Note
twamp control reflector command because the debug ip sla error twamp control reflector command
generates less debugging output.
The debug ip sla error twamp control reflector command is supported in IPv4 networks.
The undebug ip sla error twamp control reflector command is the same as the no debug ip sla error
twamp control reflector command.
Related Commands Command
debug ip sla error twamp
connection
debug ip sla error twamp
control server
debug ip sla error twamp
session
debug ip sla trace twamp
connection
debug ip sla trace twamp
control reflector
OL-9645-10
debug ip sla error twamp control reflector
no debug ip sla error twamp control reflector
Modification
This command was introduced.
Description
Displays exceptions during communication between the IP SLAs
TWAMP client and server.
Displays exceptions during communication between the IP SLAs
TWAMP server and reflector.
Displays exceptions during communication between the IP SLAs
TWAMP sender and reflector.
Displays the normal communications between an IP SLAs TWAMP
client and server.
Displays the normal communications sent by an IP SLAs TWAMP
reflector to the TWAMP server.
Catalyst 3750 Metro Switch Command Reference
debug ip sla error twamp control reflector
B-17