Cisco Catalyst 3750 Metro Command Reference Manual page 612

Hide thumbs Also See for Catalyst 3750 Metro:

Table of Contents

show parser macro

This is an example of output from the show parser description command:

Switch# show parser macro description

Global Macro(s): cisco-global

--------------------------------------------------------------

--------------------------------------------------------------

This is an example of output from the show parser description interface command:

Switch# show parser macro description interface fastethernet1/0/2

--------------------------------------------------------------

--------------------------------------------------------------

Related Commands

macro description

macro global

show running-config

Catalyst 3750 Metro Switch Command Reference

Macro Description(s)

standard-switch10

this is test macro

Macro Description

this is test macro

Applies a macro on an interface or applies and traces a macro on an interface.

Adds a description about the macros that are applied to an interface.

Applies a macro on a switch or applies and traces a macro on a switch.

Adds a description about the macros that are applied to the switch.

Creates a macro.

Displays the operating configuration. For syntax information, use this link to

the Cisco IOS Release 12.2 Command Reference listing page:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_command_

reference_list.html

Select the Cisco IOS Commands Master List, Release 12.2 to navigate to

the command.

Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands