Debug Rep - Cisco Catalyst 3750 Metro Command Reference Manual

Appendix B Catalyst 3750 Metro Switch Debug Commands

debug rep

Use the debug rep privileged EXEC command to enable debugging of Resilient Ethernet Protocol (REP)
functions. Use the no form of this command to disable debugging.
Syntax Description
all
bpa-event
bpasm
epasm
error
failure-recovery
lslsm
packet
prsm
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(46)SE
Usage Guidelines
The undebug rep command is the same as the no debug rep command.
Related Commands Command
show debugging
show interfaces rep
OL-9645-10
debug rep {all | bpa-event | bpasm | epasm | error | failure-recovery | lslsm | packet | prsm}
no debug rep {all | bpa-event | bpasm | epasm | error | failure-recovery | lslsm | packet | prsm}
Display all REP debug messages.
Display blocked port advertisement (BPA) debug messages.
Display BPA state machine debug messages.
Display end port advertisement (EPA) state machine debug messages.
Display REP protocol error debug messages.
Display REP switchover event debug messages.
Display Link State Layer (LSL) state machine debug messages.
Display protocol PDU debug messages.
Display REP port role state machine debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Displays REP configuration and status for a specified interface or for all
interfaces.
Catalyst 3750 Metro Switch Command Reference
debug rep
B-83