Debug Ip Sla Error Twamp Session - Cisco Catalyst 3750 Metro Command Reference Manual

Appendix B Catalyst 3750 Metro Switch Debug Commands

debug ip sla error twamp session

Use the debug ip sla error twamp session command in privileged EXEC mode to enable debugging
output of Cisco IOS IP Service Level Agreements (SLAs) Two-Way Active Measurement Protocol
(TWAMP) showing exceptions during communication between the TWAMP sender and reflector. Use
the no form of this command to disable debugging output.
Syntax Description source-ip
ip-address
Command Modes
Privileged EXEC
Command History Release
12.2(52)SE
Usage Guidelines
The debug ip sla error twamp session privileged EXEC command displays error messages about the
communication between the TWAMP sender and reflector.
Note Use the debug ip sla error twamp session command before using the debug ip sla trace twamp session
command because the debug ip sla error twamp session command generates less debugging output.
The debug ip sla error twamp session command is supported in IPv4 networks.
The undebug ip sla error twamp session command is the same as the no debug ip sla error twamp
session command.
Related Commands Command
debug ip sla error twamp
connection
debug ip sla error twamp
control reflector
debug ip sla error twamp
control server
debug ip sla trace twamp
connection
debug ip sla trace twamp
control reflector
OL-9645-10
debug ip sla error twamp session [source-ip ip-address]
no debug ip sla error twamp session [source-ip ip-address]
(Optional) Debug IP Performance Metrics (IPPM) TWAMP connections for
the specified source. Specify the source using the IP address of the client
device.
Modification
This command was introduced.
Description
Displays exceptions during communication between the IP SLAs
TWAMP client and server.
Displays exceptions during communication between the IP SLAs
TWAMP server and reflector.
Displays exceptions during communication between the IP SLAs
TWAMP server and reflector.
Displays the normal communications between an IP SLAs TWAMP
client and server.
Displays the normal communications sent by an IP SLAs TWAMP
reflector to the TWAMP server.
Catalyst 3750 Metro Switch Command Reference
debug ip sla error twamp session
B-21