Debug Platform Qos-Acl-Tcam - Cisco Catalyst 3750 Metro Command Reference Manual

debug platform qos-acl-tcam

debug platform qos-acl-tcam
Use the debug platform qos-acl-tcam privileged EXEC command to enable debugging of the quality
of service (QoS) and access control list (ACL) ternary content addressable memory (TCAM) manager
software. Use the no form of this command to disable debugging.
Syntax Description
all
ctcam
errors
labels
mask
rpc
tcam
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.1(14)AX
Usage Guidelines The undebug platform qos-acl-tcam command is the same as the no debug platform qos-acl-tcam
command.
Related Commands Command
show debugging
Catalyst 3750 Metro Switch Command Reference
B-68
debug platform qos-acl-tcam {all | ctcam | errors | labels | mask | rpc | tcam}
no debug platform qos-acl-tcam {all | ctcam | errors | labels | mask | rpc | tcam}
Display all QoS and ACL TCAM (QATM) manager debug messages.
Display Cisco TCAM (CTCAM) related-events debug messages.
Display QATM error-related-events debug messages.
Display QATM label-related-events debug messages.
Display QATM mask-related-events debug messages.
Display QATM remote procedure call (RPC) related-events debug messages.
Display QATM TCAM-related events debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Appendix B Catalyst 3750 Metro Switch Debug Commands
OL-9645-10