Ip Dhcp Snooping Trust - Cisco Catalyst 3750 Metro Command Reference Manual

ip dhcp snooping trust

ip dhcp snooping trust
Use the ip dhcp snooping trust interface configuration command to configure a port as trusted for
DHCP snooping purposes. Use the no form of this command to return to the default setting.
Syntax Description
This command has no arguments or keywords.
Defaults DHCP snooping trust is disabled.
Command Modes Interface configuration
Command History Release
12.2(25)EY
Usage Guidelines Configure as trusted ports those that are connected to a DHCP server or to other switches or routers.
Configure as untrusted ports those that are connected to DHCP clients.
Examples This example shows how to enable DHCP snooping trust on a port:
Switch(config-if)# ip dhcp snooping trust
You can verify your settings by entering the show ip dhcp snooping privileged EXEC command.
Related Commands Command
show ip dhcp snooping
show ip dhcp snooping binding
Catalyst 3750 Metro Switch Command Reference
2-160
ip dhcp snooping trust
no ip dhcp snooping trust
Modification
This command was introduced.
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
Description
Displays the DHCP snooping configuration.
Displays the DHCP snooping binding information.
OL-9645-10