Show Platform Qos - Cisco Catalyst 3750 Metro Command Reference Manual

show platform qos

show platform qos
Use the show platform qos privileged EXEC command to display platform-dependent quality of service
(QoS) information.
Syntax Description label asic number
policer {parameters asic number |
port alloc number asic number}
Command Modes Privileged EXEC
Command History Release
12.1(14)AX
Usage Guidelines You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Catalyst 3750 Metro Switch Command Reference
C-24
show platform qos {label asic number | policer {parameters asic number |
port alloc number asic number}}
Modification
This command was introduced.
Appendix C Catalyst 3750 Metro Switch Show Platform Commands
Display QoS label maps for the specified ASIC.
(Optional) For asic number, the range is 0 to 1.
Display policer information. The keywords have these
meanings:
parameters asic number—Display parameter
•
information for the specified ASIC. The range is 0 to 1.
port alloc number asic number—Display port allocation
•
information for the specified port and ASIC. The port
allocation range is 0 to 25. The ASIC range is 0 to 1.
OL-9645-10