Debug Ip Dhcp Snooping - Cisco Catalyst 3750 Metro Command Reference Manual

Appendix B Catalyst 3750 Metro Switch Debug Commands

debug ip dhcp snooping

Use the debug ip dhcp snooping privileged EXEC command to enable debugging of DHCP snooping.
Use the no form of this command to disable debugging.
Syntax Description
mac-address
agent
event
packet
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)EY
Usage Guidelines
The undebug ip dhcp snooping command is the same as the no debug ip dhcp snooping command.
Related Commands Command
show debugging
OL-9645-10
debug ip dhcp snooping {mac-address | agent | event | packet}
no debug ip dhcp snooping {mac-address | agent | event | packet}
Display debug messages for a DHCP packet with the specified MAC address.
Display debug messages for DHCP snooping agents.
Display debug messages for DHCP snooping events.
Display debug messages for DHCP snooping.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are
enabled.
Catalyst 3750 Metro Switch Command Reference
debug ip dhcp snooping
B-11