Show Ethernet Service Evc - Cisco Catalyst 3750 Metro Command Reference Manual

Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands

show ethernet service evc

Use the show ethernet service evc privileged EXEC command to display information about Ethernet
virtual connection (EVC) customer-service instances.
Syntax Description id evc-id
interface interface-id
detail
Command Modes
Privileged EXEC
Command History Release
12.2(25)SEG
Examples
This is an example of output from the show ethernet service evc command:
Switch# show ethernet service evc
Identifier
BLUE
PINK
PURPLE
BROWN
GREEN
YELLOW
BANANAS
TEST2
ORANGE
TEAL
Related Commands Command
ethernet evc
OL-9645-10
show ethernet service evc [id evc-id | interface interface-id] [detail]
(Optional) Display EVC information for the specified service. The EVC
identifier can be a string of from 1 to 100 characters.
(Optional) Display EVC information for the specified interface.
(Optional) Display detailed information about EVC service or the specified
EVC ID or interface.
Modification
This command was introduced.
evc-id
Type Act-UNI-cnt Status
P-P 2 Active
MP-MP 2 PartiallyActive
P-P 2 Active
MP-MP 2 Active
P-P 3 Active
MP-MP 2 PartiallyActive
P-P 0 InActive
P-P 0 NotDefined
P-P 2 Active
P-P 0 InActive
Description
Defines an EVC and enters EVC configuration mode.
Catalyst 3750 Metro Switch Command Reference
show ethernet service evc
2-465