Clear Ip Arp Inspection Statistics - Cisco Catalyst 3750 Metro Command Reference Manual

Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands

clear ip arp inspection statistics

Use the clear ip arp inspection statistics privileged EXEC command on the switch to clear the dynamic
Address Resolution Protocol (ARP) inspection statistics.
This command is available only if your switch is running the enhanced multilayer image (EMI).
Syntax Description
vlan vlan-range
Defaults
No default is defined.
Command Modes Privileged EXEC
Command History Release
12.2(25)EY
Examples
This example shows how to clear the statistics for VLAN 1:
Switch# clear ip arp inspection statistics vlan 1
You can verify that the statistics were deleted by entering the show ip arp inspection statistics vlan 1
privileged EXEC command.
Related Commands Command
show ip arp inspection
statistics
OL-9645-10
clear ip arp inspection statistics [vlan vlan-range]
(Optional) Clear statistics for the specified VLAN or VLANs.
You can specify a single VLAN identified by VLAN ID number, a range of
VLANs separated by a hyphen, or a series of VLANs separated by a comma.
The range is 1 to 4094.
Modification
This command was introduced.
Description
Displays statistics for forwarded, dropped, MAC validation failure, and
IP validation failure packets for all VLANs or the specified VLAN.
Catalyst 3750 Metro Switch Command Reference
clear ip arp inspection statistics
2-43