Show Platform Ip Igmp Snooping - Cisco Catalyst 3750 Metro Command Reference Manual

show platform ip igmp snooping

show platform ip igmp snooping
Use the show platform ip igmp snooping privileged EXEC command to display platform-dependent
Internet Group Management Protocol (IGMP) snooping information.
Syntax Description all
control [di]
counters
flood [vlan vlan-id]
group ip-address
hardware
retry [count | local
[count]
remote [count]
Command Modes Privileged EXEC
Command History Release
12.1(14)AX
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Catalyst 3750 Metro Switch Command Reference
C-8
show platform ip igmp snooping {all | control [di] | counters | flood [vlan vlan-id] | group
ip-address | hardware | retry [count | local [count] | remote [count]]}
Display all IGMP snooping platform IP multicast information.
Display IGMP snooping control entries. The keyword has this meaning:
di—(Optional) Display IGMP snooping control destination index
•
entries.
Display IGMP snooping counters.
Display IGMP snooping flood information. The keyword has this meaning:
• vlan vlan-id—(Optional) Display flood information for the specified
VLAN. The range is 1 to 4094.
Display the IGMP snooping multicast group information, where ip-address is
the IP address of the group.
Display IGMP snooping information loaded into hardware.
Display IGMP snooping retry information. The keywords have these
meanings:
• count—(Optional) Display only the retry count.
local—(Optional) Display local retry entries.
•
Display remote entries. The keyword has this meaning:
count—(Optional) Display only the remote count.
•
Modification
This command was introduced.
Appendix C Catalyst 3750 Metro Switch Show Platform Commands
OL-9645-10